Product Overview RE-104 is a right blend of affordable design and quality with latest technology for fire alarm control panels. This microprocessor based conventional Fire Alarm Control panel, is designed for small size commercial buildings and small scale industries. RE-104 model is an user friendly 4 zone standalone control panel, with optional zone wise Sounder/Contact respectively.
Ravel Indian Manufacturer, International standard.
Switch Mode Power Supply.
Modular Construction, Serviceable.
Surface Mount Technology.
Battery polarity & deep discharge protection.
As per IS -15908: 2011 Standard.
16 X 2 Dot Matrix LCD Display.
Standby battery backup with built in charging.
Fire / Fault status in unambiguous colored LED indication.
Switch Mode Power Supply.
Tactile Keypad for easy panel operation.
System on indication.
Main, Standby status indication.
Low Battery visual warning with audible tone.
Relay output for actuators for Fire and Fault.
Lamp Test facility
Zone wise one man walk Test Facility.
Zone wise Isolation facility with loop voltage cut off.
Compatible to all type of Conventional Detectors.
Optional Zone Wise Sounder / Zone Wise Contact.
Electrical Specification
Primary Power
120 – 220VAC , 50 Hz Common Relays
Type : Form C
No of Relays : 3
Relay Contact Rating : 2Amps @ 30 VDC, 0.5Amps @125VAC.
Power Factor : 1
Standby Power
24V D.C (2 Nos of 12v, 7Ah Sealed Lead acid battery).
Quiescent current : 55mA
Operating Condition
Operating Temperature : 0 – 49° C/32-120° F.
Relative Humidity : 93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F. Initiating Device Circuits (Zone Circuit)
All zones are Class B wiring
Normal Operating Voltage : 14- 21 VDC
Alarm Current : 15 – 30mA
Short Circuit Current : 42mA Maximum
Loop resistance : 50 ohms Maximum
End-Of-Line Resistor : 4.7K, 1/4watt
Standby Current : 6.8mA (2.4mA for Detectors)
Charging Circuit
Charging Voltage 28.2V, ±0.5V
Charging Current 0.5 A (Max.).
Notification Appliance Circuits
Class B wiring
Operating Nominal Voltage : 24VDC
Current for NACs : 0.6 Amp
End-Of-Line Resistor : 4K7, 1/4 watt
Mechanical Specification
Dimensions : (350W X 250H X 100D)
Color : Red / White
Construction : 18 Gauge (1.22mm) CRCA sheet with powder-coated Finish
IP Rating : IP50
Cable Entry : 11xø19mm Knockout in top of the cabinet
Ordering Information
Model Description
RE-104-R 4 ZONE Fire Alarm Panel
RE-104-W 4 ZONE Fire Alarm Panel
Note:
R- Red Color, W-White Color
Compatible Devices
Model Description
RE-316S-2L Photoelectric Smoke detector with base.
RE-316H-2L Heat detector with base.
RE-316SH-2L Photoelectric & Heat detector with base
